Sawyer Squeeze To Bucket Conversion Kit SP158

Connect your water filter to a bucket using the convenient Sawyer Squeeze to Bucket Conversion Kit. Designed for use with the Sawyer Squeeze or Mini water filters (filters not included), this kit allows you to set up your filtration system quickly and effortlessly.

Whether you're out camping or in need of a dependable water purification system at home, this conversion kit will transform a bucket into a reliable water filtration station and is a valuable addition to your water filtration gear. Note* The water filters themselves are not included in this kit.

The kit includes essential components:

Drillbit* (Note: *drillbit may vary depending on the version)
Adapter
Tube
Two rubber rings
Plastic bolt
Connector
Water filter hanger

Details

How to Use the Bucket Conversion Kit

Start with a bucket.
Use the provided drill bit to create a hole approximately 4cm above the bucket's bottom.
Ensure you remove any loose plastic bits around the hole to prevent leaks.
Take one of the rubber rings and slide it onto the black adapter's thread.
Insert the threaded part of the adapter through the hole from the outside of the bucket.
Place the second rubber ring inside the bucket around the adapter's thread.
Tighten the plastic bolt firmly against the inner rubber ring.
Attach the grey hose on the outside over the spout of the adapter.
Fix the grey connector on the other end of the hose.
Slide the filter hanger over the water filter, then screw the grey connector securely onto the water filter.
Fill the bucket with the dirty water.

Now, all that's left to do is lower the water filter into the bucket, and the filtration process begins!
By following these straightforward steps, you can efficiently filter water with ease to cherish clean and safe drinking water wherever you need it.

Specification