Elliot Brown Bloxworth 3HD 929-102-R51G Watch

SKU
0051
A$885.00 (incl. gst)
In stock

Bloxworth 929-102-R51G Watch by Elliot Brown - Black EPDM Rubber Strap

This Elliot Brown Bloxworth 3HD 929-102-R51G Diver's Watch has a vapour blasted dark gunmetal finish on this 102 model which gives it its ceramic finish. The precision of the case finishing is so beautifully highlighted with highly detailed pops of gloss that lift it to another level. The overall effect is a watch that looks ready for duty but is so easy on the eye and on the wrist.

Elliot Brown watches are resilient. Capable of withstanding shock, prolonged exposure to water and dust and has undoubtedly been put through the test. This Bloxworth watch has been pressure tested to 150m twice during construction and then submerged in a water-filled pressure vessel that is then cranked up to 200m.

All EB Watch straps have a uniform width of 22mm. Because of this you can interchangeably custom fit any EB strap to any EB watch case. To find out more about Elliot Brown's Straps see below - EB Straps - Sizing & Fitting Guide.

Comes with a driver tool that is made to fit the solid stainless screw-in retaining bars that hold the straps. Read below PDF attachment for Care & Maintenance of your Elliot Brown watch and find out how to use EB's patented Deployment Buckle below. Rubber Straps can be cut and custom to size if they are too large, read the Instructions below on how this is done before doing so.

 

  • Dual layer embossed cool grey sandwich dial with polished minutes track
  • Ceramic non scratch uni-directional 120 click timing bezel
  • Vapour blasted dark gunmetal case with high polished elements
  • Domed Box anti-reflective sapphire crystal
  • Signature basket weave textures for dial and compressor case back
  • Swiss made Ronda 713 quartz movement
  • Marine grade stainless steel case, bezel and strap bars
  • High contrast SuperLuminova numerals coloured in a bespoke Purbeck stone, with matching hands and batons
  • 40mm case / 41mm bezel with high lume ceramic insert
  • Domed screw down crown at 4 o'clock with triple seals
  • Internal movement shock protection system
  • 100% tested at 200m in water
  • Unbreakable easy change strap bars
  • Double folding Deployant Buckle on this bespoke Tropic style divers rubber strap
  • Hand signed Founders commemorative insert

 

EB Bloxworth Watch - Black

Bezel
The highlights do not start and end with the case finishing though. The scratch resistant ceramic bezel insert with flush, highly lumed batons and numerals allow clear low 'vizí timing, whilst perfectly framing the dial and box profile sapphire crystal that gently rises into a shallow dome. The outer edge of the diver's bezel is machined with deep castellations for excellent grip. Itís unidirectional rotation (anticlockwise) ensures that only a shorter remaining time will be indicated when itís being used for timing if it should be accidentally knocked. The crown and push-buttons are knurled for superior grip in harsh conditions.

Dial
The 2 layer sandwich dial of this model is discreet with a smooth black central lower layer framed by a subtle chamfer just outside the micro markers. Matt tungsten-coloured hands with a warm sand lume colour infill, command just the right amount of attention from the eye, set against the clarity of the ultra-bold dial markers. Both glow for up to 8 hours after a good ëchargeí in daylight for great visibility on all conditions.

Strap
The texture on the outer surface of the fitted black rubber strap suits this watch so well, sitting flush against the matt case with a subtle border embossed into the rubber. The textured surface is created using elements from the Elliot Brown logo, which is repeated, then embossed into the soft rubber surface. The rubber strap is inspired by hand drawn lines and ropes that is seen daily in the boat yard HQ. It is fitted with functional split deployant buckle with a raised Elliot Brown (EB) shield with a highly polished outer edge to match the case highlights. Take a look at the Instruction tab for how to custom fit your strap to you.

Caseback
The basket weave detail is seen on the caseback, framing the raised and polished shield with a subtle matt texture. The caseback is bolted down, not threaded, because it's the best way of holding the shock-absorbing movement housing accurately inside the case, sealing the case back and ensuring the logo is presented in perfect alignment. This feature is indicative of the detail Elliot Brown go to in everything they do; resolved, well considered and highly functional.

Movement
Swiss-made 13-jewel chronograph movement with a 3 year battery life inside a shock-absorbing steel movement housing.

Crystal
The Watch face is machined from 316L marine-grade stainless steel. The watch glass made to outlast is made of 2.8mm hardened and tempered anti-reflective mineral crystal that will keep a clear vision in virtually any condition.

  • Dimensions: 9H-3H 41mm excluding crown and push-buttons
  • Dimensions: 12H-6H 50mm max to tip of case shoulders
  • Maximum Thickness: 12.5mm
  • Strap Width: 22mm
  • Strap: Black EPDM Rubber
  • Buckle: Deployment Buckle
  • Case: Gunmetal Marine-Grade 316L Stainless Steel
  • Crystal: 2mm Sapphire Crystal
  • Weight (Watch Only): 130g
  • Weight (Including Case): 280g
  • Warranty: 5 Years
  • Manufacturer Number: 929-102-R51G
Write Your Own Review
You're reviewing:Elliot Brown Bloxworth 3HD 929-102-R51G Watch
Your Rating

RESOURCE FILES

Download Information by clicking Below Pdfs
pdf
pdf
pdf
pdf